Products

• 
  C27200 Yellow Brass "63.5%" (CDA 272)

  EN equivalent CuZn37 Typical Uses Fasteners: Fasteners, Fasteners Industrial: Cold Headed Parts, Heat Exchanger Shells, Pump Cylinder Liners
• 
  C68700 Aluminum Brass Tube

  ASTM B111 C68700 Aluminum Brass "Arsenical" UNS CDA101, ASTM B111, ASTM B395, ASTM B187, ASTM B152
• 
  C11000 Pure Copper Tube

  C11000 Pure Copper Tube
• 
  C10200 Oxygen Free Copper (CDA 102)

  UNS CDA 102, SAE J461, ASTM B152, ASTM B187, ASTM B272 High Conductivity (OFHC) Copper characteristics are high ductility, high electrical and thermal conductivity, high impact strength, good creep resistance, ease of welding, and low volatility under high vacuum. TYPICAL USES FOR C10200 OXYGEN FREE COPPER: ELECTRICAL: Electrical Conductors, Klystrons, Microwave Tubes, Transistor Components, Lead In Wire, Coaxial Cables, Copper to Glass Seals in Electronic Appliances, Busbars, Bus Conductors, Wave Guides INDUSTRIAL: Tubing, LP Gas Service, Tubing, Medical Gas- Oxygen, Vacuum Seals, Coaxial Tube, Billet Mold Tube, Extrusion Cans for Powder Metallurgy
• 
  27200 Electrolytic Tough Pitch (ETP) Copper

  EN equivalent CuZn37 Typical Uses Fasteners: Fasteners, Fasteners Industrial: Cold Headed Parts, Heat Exchanger Shells, Pump Cylinder Liners
• 
  C11000 Electrolytic Tough Pitch (ETP) Copper

  Standards: ASTM B-187, ASTM B-124, ASTM B-133, SAE 461, SAE J461, SAE J463, AMS 4500, DIN 2.0065 C11000 Electrolytic Tough Pitch (ETP) Copper is known for its high electrical and thermal conductivity, good corrosion resistance and solderability. C11000 copper is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current-carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification. This copper has excellent hot workability.
• 
  C11000 T2 Electrolytic Tough Pitch (ETP) Copper Sheets

  Standards: ASTM B-187, ASTM B-124, ASTM B-133, SAE 461, SAE J461, SAE J463, AMS 4500, DIN 2.0065 C11000 Electrolytic Tough Pitch (ETP) Copper is known for its high electrical and thermal conductivity, good corrosion resistance and solderability. C11000 copper is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current-carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification. This copper has excellent hot workability.
• 
  C10200 OF Copper Coil Strip

  UNS CDA 102, SAE J461, ASTM B152, ASTM B187, ASTM B272 High Conductivity (OFHC) Copper characteristics are high ductility, high electrical and thermal conductivity, high impact strength, good creep resistance, ease of welding, and low volatility under high vacuum. TYPICAL USES FOR C10200 OXYGEN FREE COPPER: ELECTRICAL: Electrical Conductors, Klystrons, Microwave Tubes, Transistor Components, Lead In Wire, Coaxial Cables, Copper to Glass Seals in Electronic Appliances, Busbars, Bus Conductors, Wave Guides INDUSTRIAL: Tubing, LP Gas Service, Tubing, Medical Gas- Oxygen, Vacuum Seals, Coaxial Tube, Billet Mold Tube, Extrusion Cans for Powder Metallurgy