Hexagonal Bar

• 
  C19140 Low Leaded Nickel Copper

  C19140 Leaded Nickel Copper Typical Uses Electrical: Contacts, Sockets, Connector Pins Density: 0.320 lb/in3 at 68 F
• 
  C17510 Copper

  ASTM B441 (ROD), ASTM B534 (PLATE) , RWMA Class III C17510 Beryllium Copper is an alloy used primarily in applications that require high thermal or electric conductivity. The alloy offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively.
• 
  C11000 Electrolytic Tough Pitch (ETP) Copper

  Standards: ASTM B-187, ASTM B-124, ASTM B-133, SAE 461, SAE J461, SAE J463, AMS 4500, DIN 2.0065 C11000 Electrolytic Tough Pitch (ETP) Copper is known for its high electrical and thermal conductivity, good corrosion resistance and solderability. C11000 copper is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current-carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification. This copper has excellent hot workability.