Products

• 
  C17200 Copper (CDA 172)

  ASTM B196, AMS 4533, SAE J461, RWMA CLASS IV, CuBe2 2.1247
• 
  C11000 Electrolytic Tough Pitch (ETP) Copper

  ASTM B-187, ASTM B-124, ASTM B-133, SAE 461, SAE J461, SAE J463, AMS 4500, DIN 2.0065
• 
  11-C16200 Cadmium Copper (CDA 162)

  SAE J461 C16200 Cadmium Copper alloy offers a unique combination of high tensile strength and high electrical conductivity for an industry where these properties are generally considered incompatible. The nominal composition of 99.0% copper and 1.0% cadmium can lead to these unique properties.
• 
  C12200 PHOSPHORUS-DEOXIDIZED, HIGH RESIDUAL P (Cu-DHP)
• 
  C11000 Electrolytic Tough Pitch (ETP) Copper

  EN equivalent CuZn37 Typical Uses Fasteners: Fasteners, Fasteners Industrial: Cold Headed Parts, Heat Exchanger Shells, Pump Cylinder Liners
• 
  C35330 DZR Brass (CW511L)

  CDA3533, CDA486, AS-352, Q214åÊ Cu-Zn alloys containing more than 15% Zn are susceptible to a dealloying process called Dezincification where the selective removal of Zn leaves a relatively porous and weak layer of Cu and Cu oxide. Corrosion of a similar nature continues beneath the primary corrosion layer resulting in gradual replacement of sound brass by weak, porous copper. Unless arrested this corrosion mechanism eventaully penetrates the metal, weakening it structurally and allowing liquids or gasses to leak through this porous mass. Additions of As (typically 0.02 - 0.25%) to alpha brasses effectively produces high resistance to dezincification at normal operating temperatures. A further addition of Sn (up to 1.5%) further enhances resistance to dezincification and has led to the development of Naval brasses with good resistance in marine environments.
• 
  C35300 Threaded Rolling Brass

  C35300 Threaded Rolling Brass
• 
  C26000 Cartridge Brass "70/30" (CDA 260)

  ASTM B36 (Bar, Sheet, and Plate), ASTM B135 (Tubing), SAE J461 EN equivalent for this alloy CuZn30