SHEET/PLATES

• 
  C12200 PHOSPHORUS-DEOXIDIZED, HIGH RESIDUAL P (Cu-DHP)

  CDA 122, SAE J461
• 
  C36000 Free Cutting Brass / Free Machining Brass

  Standards: ASTM B16, SAE J461, SAE J463, SAE 72 AMS 4610, CW603N, DIN 2.0375
• 
  C95400 Aluminum Bronze (C954) - Per ASTM B505

  Standards: ASTM B-148, ASTM B-271, ASTM B-505, ASTM B-763, SAE 461, SAE J461, SAE J462, SAE 68A, AMS 4870, AMS 4871, AMS 4635
• 
  C93200 Bearing Bronze (SAE660) - C932 Leaded Tin Bronze

  Standards: ASTM B-66, ASTM B-271, ASTM B-505, ASTM B-584, SAE 461, SAE J461, SAE J462, SAE660, DIN 2.1090.03
• 
  C63200 Nickel Aluminum Bronze

  ASTM B150, QQ-C-465
• 
  C63000 Nickel Aluminum Bronze - AMS 4640 / CDA 630

  Standards: ASTM B-124, ASTM B-150, ASTM B-171, B-283, SAE J461, SAE J463, AMS 4640F, AMS 4880B, DIN 2.0966
• 
  C11000 T2 Electrolytic Tough Pitch (ETP) Copper Sheets

  Standards: ASTM B-187, ASTM B-124, ASTM B-133, SAE 461, SAE J461, SAE J463, AMS 4500, DIN 2.0065 C11000 Electrolytic Tough Pitch (ETP) Copper is known for its high electrical and thermal conductivity, good corrosion resistance and solderability. C11000 copper is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current-carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification. This copper has excellent hot workability.
• 
  C10100 OFHC Oxygen Free Electronic Copper Sheets (CDA 101)

  C10100 Oxygen-Free Electronic Copper, also known as OFE, is a 99.99% pure copper with 0.0005% oxygen content. C101 achieves a minimum 101% IACS conductivity rating. This copper is finished to a final form in a carefully regulated, oxygen-free environment. C10100 OFE has High ductility, high electrical and thermal conductivity and low volatility under high vacuum.