Products

• 
  C27400 Yellow Brass "63/37"

  Hot-forms more readily and is stronger than C26000.
• 
  C65100 Low Silicon Bronze "B"

  ASTM B98 C65100 is an engineering alloy at least as resistant to corrosion as copper itself, but much stronger, and with good fatigue endurance. 651 Bronze is an alloy noted for its brazeability, strength, corrosion resistance, and electrical properties. C65100 is one of the most weldable copper alloys. It is readily joined by all types of resistance welding. Joining by soldering or brazing is excellent. Joining by gas shielded arc welding and spot welding is also excellent, and by oxyacetylene welding, good. C65100 finds its broadest use as rod and wire for cold headed and roll threaded bolts, wood screws and lag screws. C65100 wood screws and lag screws have unusually high strength and toughness, freedom from embrittlement, and a high degree of corrosion resistance to all types of water, saline fogs, and a wide variety of other corrosives. 651 Bronze hull and deck fastenings are the standard materials with yacht designers and the majority of builders of stock power boats. The alloy is also used for cable connectors, mast tangs, deck and pilot house hardware and equipment, welded fuel and water tanks for pleasure and commercial crafts. It is also one of the best copper alloys for pole line hardware. C65100 nails are also widely used in boat construction and for nailing slate, heavy tile, and other materials where strength and corrosion resistance are essential.
• 
  C2680/C2700 Brass Tube

  C27000 Yellow Brass "65%" (CDA 270) ASTM B134, SAE J461 Hot-forms more readily and is stronger than C26000. Typical Uses for C27000 Yellow Brass "65%": ARCHITECTURE: Handrails, Grillwork AUTOMOTIVE: Tanks, Radiator Cores BUILDERS HARDWARE: Push Plates, Finish Hardware, Hinges, Stencils, Kick Plates, Locks ELECTRICAL: Socket Shells, Screw Shells, Reflectors, Lamp Fixtures, Flashlight Shells FASTENERS: Grommets, Eyelets, Screws, Rivets, Fasteners, Pins INDUSTRIAL: Bead Chain, Springs, Chain MARINE: Fasteners PLUMBING: Sink Strainers, Plumbing Accessories
• 
  C93200 SAE660 Bearing Bronze Tube
• 
  C27000 CuZn36 Brass Strip

  ASTM B134, SAE J461 Hot-forms more readily and is stronger than C26000.
• 
  C51000 CuSn5 Phosphor Bronze Strip

  En equivalent CuSn5 ASTM B139, QQ-B750, SAE J461 C51000 Phosphor Bronze alloy possess a higher yield strength than is readily available in most cast products. Typical applications for phosphor bronze include bearings, bushings, gears, pinions, shafts, thrust washers and valve parts. C51000 Phosphor bronze can be readily brazed or soldered. Capacity for being cold worked is good.
• 
  C23000 CuZn15 Red Brass Tube

  Brass is a term that refers to a wide range of copper-zinc alloys with different properties  that include machinability, strength, hardness, wear-resistance, ductility, corrosion-resistance, antimicrobial, electrical and thermal conductivity and color. Brasses are available in a wide range of colors such as yellow, red, silver and gold etc. These colored brasses, which can be easily shaped, are used by designers and architects in order to improve the inside and outside appearances of buildings. UNS C23000 brass alloys are red in color and stronger than C22000 alloys. The following datasheet provides an overview of UNS C23000 red brass alloys.
• 
  C61900 Aluminum Bronze Tube